Home « Norgren VDMA Pneumatic Cylinders 32 - 125mm Bore

Norgren VDMA Magnetic Air Cylinder 32-125 Bore

  Norgrens PRA range of tie rod assembled double acting air cylinders are available in seven bore sizes from 32 to 125mm and standard stroke lengths from 25 to 500mm. Longer stroke length are available upon request. Magnetic sensor type cylinders are supplied as standard from stock, non magnetic are also available if required. The Norgren PRA cylinder is very robust and can be used with a wide range of mountings. All units have adjustable cushion at both ends. The cylinders may be used with filtered lubricated or non lubricated compressed air. The use of high tech polyurethane piston seals give low friction breakaway, faster response time and longer service life. For added corrosion protection the piston rod is stainless steel.
 
Select the bore size required from the table below:
Double Acting Cylinder Force Developed in Newtons @ 6 bar (lbs Force)
Bore Size
Inlet BSP
Rod Diameter
Rod Thread
N Thrust
N Pull
1/8
12
M10x1.25
482 (120)
414 (103)
1/4
16
M12x1.25
753 (188)
633 (158)
1/4
20
M16x1.5
1178 (294)
989 (247)
3/8
20
M16x1.5
1870 (467)
1681 (420)
3/8
25
M20x1.5
3015 (753)
2721 (680)
1/2
25
M20x1.5
4712 (1178)
4418 (1104)
1/2
32
M27x 2
7363 (1840)
6881 (1750)
See each manufacturers PDF for specific technical specifications.
View all in this range
-->